D-Link xStackTM DGS-3300 User Manual page 145

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
enable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snooping on the Switch:
DGS-3324SRi:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DGS-3324SRi:4#
disable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable IGMP snooping on the Switch:
DGS-3324SRi:4#disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-3324SRi:4#
Used to enable IGMP snooping on the Switch.
enable igmp_snooping {forward_mcrouter_only}
This command allows the user to enable IGMP snooping on the Switch.
If forward_mcrouter_only is specified, the Switch will only forward all
multicast traffic to the multicast router, only. Otherwise, the Switch
forwards all multicast traffic to any IP router.
forward_mcrouter_only − Specifies that the Switch should only forward
all multicast traffic to a multicast-enabled router. Otherwise, the Switch
will forward all multicast traffic to any IP router.
Only administrator-level users can issue this command.
Used to enable IGMP snooping on the Switch.
disable igmp_snooping {forward_mcrouter_only}
This command disables IGMP snooping on the Switch. IGMP
snooping can be disabled only if IP multicast routing is not being
used. Disabling IGMP snooping allows all IGMP and IP multicast
traffic to flood within a given IP interface. If forward_mcrouter_only
is specified, the Switch will forward all multicast traffic to any IP
router.
forward_mcrouter_only − Specifies that the Switch will forward all
multicast traffic to any IP router.
Only administrator-level users can issue this command.
142