Switch Utility Commands - D-Link xStackTM DGS-3300 User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
The switch utility commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table. Please note that commands concerning the CompactFlash card (cfg_fromCf, firmware_to CF, etc.) are specific
to the DGS-3324SRi only.
Command
download
download
prom_fromTFTP
upload
show
firmware_information
config firmware
image_id
ping
traceroute
Each command is listed, in detail, in the following sections.
download
Purpose
Syntax
Description
Parameters
Parameters
[firmware_fromTFTP <ipaddr> <path_filename 64> image_id <int
1-2> {unit [all | <unitid 1-12>]} | cfg_fromTFTP <ipaddr>
<path_filename 64> {increment} | firmware_fromCF <path_filename
64> image_id <int 1-2> | cfg_fromCF <path_filename 64>
{increment}]
<ipaddr> <path_filename 64>
[cfg_toTFTP <ipaddr> <path_filename 64> | log_toTFTP <ipaddr>
<path_filename 64> | [firmware_toCF <path_filename 64>
image_id <int 1-2> | cfg_toCF <path_filename 64> | log_toCF
<path_filename 64>]
<int 1-2> [delete | boot_up]
<ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
<ipaddr> {ttl <value 1-60> | port <value 30000-64900> | timeout
<sec 1-65535> | probe <value <1-9>
Used to download and install new firmware or a switch
configuration file from a TFTP server or a CompactFlash memory
card.
download [firmware_fromTFTP <ipaddr> <path_filename 64>
image_id <int 1-2> {unit [all | <unitid 1-12>]} | cfg_fromTFTP
<ipaddr> <path_filename 64> {increment} | firmware_fromCF
<path_filename 64> image_id <int 1-2> | cfg_fromCF
<path_filename 64> {increment} ]
This command is used to download a new firmware or a switch
configuration file from a TFTP server or a CompactFlash memory
card.
firmware_fromTFTP − Download and install new firmware on the
Switch from a TFTP server.
firmware_fromCF − Download and install new firmware on the
Switch from a CompactFlash server.
cfg_fromTFTP - Download a switch configuration file from a TFTP
server.
cfg_fromCF - Download a switch configuration file from a CF
server.
52
S U
WITCH TILITY
8
C
OMMANDS