Commands - D-Link xStackTM DGS-3300 User Manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
The xStack DGS/DXS-3300 series implement the server-side of the IEEE 802.1x Port-based and MAC-based Network Access
Control. This mechanism is intended to allow only authorized users, or other network devices, access to network resources by
establishing criteria for each port on the Switch that a user or network device must meet before allowing that port to forward or
receive frames.
Command
enable 802.1x
disable 802.1x
create 802.1x user
show 802.1x user
delete 802.1x user
show 802.1x auth_state
show 802.1x
auth_configuration
config 802.1x auth_mode
config 802.1x capability
config 802.1x
auth_parameter ports
config 802.1x
auth_protocol
config 802.1x init
config 802.1x reauth
config radius add
config radius delete
config radius
show radius
show acct_client
show auth_client
show auth_diagnostics
show auth_session
statistics
show auth_statistics
Parameters
<username 15>
ports [<portlist> | all]
ports [<portlist> | all]
[port_based | mac_based]
[ports <portlist> | all] [authenticator | none]
[<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-
65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-
65535> | server_timeout <sec 1-65535> | max_req <value 1-
10> | reauth_period <sec 1-65535> | enable_reauth [enable |
disable]}]
[local | radius eap]
{port_based ports [<portlist> | all]} | mac_based [ports]
[<portlist> | all] {mac_address <macaddr>}]
{port_based ports [<portlist> | all]} [<portlist> | all]
{mac_address <macaddr>}]
<server_index 1-3> <server_ip> key <passwd 32> [default
{auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
<server_index 1-3>
<server_index 1-3> {ipaddress <server_ip> | key <passwd
32> [auth_port <udp_port_number 1-65535> acct_port
<udp_port_number 1-65535>]}
{ports [<portlist> | all]}
{ports [<portlist> | all]}
{ports [<portlist> | all]}
190
802.1X C
OMMANDS
24