D-Link xStackTM DGS-3300 User Manual page 115

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#config mirror port 1:10 delete source port 1:1-1:5 both
Command: config mirror 1:10 delete source 1:1-1:5 both
Success.
DGS-3324SRi:4#
enable mirror
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable mirroring configurations:
DGS-3324SRi:4#enable mirror
Command: enable mirror
Success.
DGS-3324SRi:4#
disable mirror
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable mirroring configurations:
DGS-3324SRi:4#disable mirror
Command: disable mirror
Success.
DGS-3324SRi:4#
Used to enable a previously entered port mirroring configuration.
enable mirror
This command, combined with the disable mirror command below,
allows the entry of a port mirroring configuration into the Switch, and
then turn the port mirroring on and off without having to modify the port
mirroring configuration.
None.
None.
Used to disable a previously entered port mirroring configuration.
disable mirror
This command, combined with the enable mirror command above,
allows the entry of a port mirroring configuration into the Switch, and
then turn the port mirroring on and off without having to modify the port
mirroring configuration.
None.
Only administrator-level users can issue this command.
112