D-Link xStackTM DGS-3300 User Manual page 41

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
create snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the SNMP community string "dlink:"
DGS-3324SRi:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DGS-3324SRi:4#
delete snmp community
Purpose
Syntax
Used to create an SNMP community string to define the relationship
between the SNMP manager and an agent. The community string acts
like a password to permit access to the agent on the Switch. One or
more of the following characteristics can be associated with the
community string:
An Access List of IP addresses of SNMP managers that are permitted
to use the community string to gain access to the Switch's SNMP
agent.
An MIB view that defines the subset of all MIB objects that will be
accessible to the SNMP community.
Read-write or read-only level permission for the MIB objects accessible
to the SNMP community.
create snmp community <community_string 32> view <view_name
32> [read_only | read_write]
The create snmp community command is used to create an SNMP
community string and to assign access-limiting characteristics to this
community string.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
view <view_name 32> − An alphanumeric string of up to 32 characters
that is used to identify the group of MIB objects that a remote SNMP
manager is allowed to access on the Switch.
read_only − Specifies that SNMP community members using the
community string created with this command can only read the
contents of the MIBs on the Switch.
read_write − Specifies that SNMP community members using the
community string created with this command can read from and write to
the contents of the MIBs on the Switch.
Only administrator-level users can issue this command.
Used to remove a specific SNMP community string from the
Switch.
delete snmp community <community_string 32>
38