Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Example usage:
To view the storage media accessory information:
cd
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To change the name of a file directory located on the storage media accessory:
copy
Purpose
Syntax
Description
Parameters
Restrictions
DGS-3324SRi:4#show storage_media_info
Command: show storage_media_info
------------------------------------------------
Drive Media_Type Size
C:
CF Card
------------------------------------------------
DGS-3324SRi:4#
Used to change the name of the directory located on the
CompactFlash card.
cd {<pathname 64>}
This command is used to change the name of a directory located on
a CompactFlash card.
<pathname 64> - Enter the path and name of the directory to
change. This entry cannot exceed 64 characters in length.
Only administrator-level users can issue this command.
DGS3324SRi:#4cd c:/test1
Command: cd c:/test1
Done!
DGS3324SRi:#4
Used to copy a file.
copy <source_path_filename 64> <target_path_filename 64>
This command is used to copy a file from a source location and
paste it to a host location. This command is only operable for the
storage media accessory.
<source_path_filename 64> - Enter the path and file name of the
directory to be copied. This entry cannot exceed 64 characters in
length.
<target_path_filename 64> - Enter the file name of the directory and
the path to place the copy. This entry cannot exceed 64 characters
in length.
Only administrator-level users can issue this command.
Label
FS_Type
30MB
TEST
FAT16
348
Advertisement
Table of Contents
