D-Link xStackTM DGS-3300 User Manual page 291

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#disable dnsr cache
Command: disable dnsr cache
Success.
DGS-3324SRi:4#
Example Usage:
To disable static table lookup for DNS relay.
DGS-3324SRi:4#disable dnsr static
Command: disable dnsr static
Success.
DGS-3324SRi:4#
show dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display DNS relay status:
DGS-3324SRi:4#show dnsr
Command: show dnsr
DNSR Status
Primary Name Server
Secondary Name Server
DNSR Cache Status
DNSR Static Cache Table Status
DNS Relay Static Table
Domain Name
-------------------------------------- ---------------
www.123.com.tw
bbs.ntu.edu.tw
Total Entries: 2
DGS-3324SRi:4#
Used to display the current DNS relay status.
show dnsr {static}
This command is used to display the current DNS relay status.
static − Allows the display of only the static entries into the DNS
relay table. If this parameter is omitted, the entire DNS relay table
will be displayed.
None.
: Disabled
: 0.0.0.0
: 0.0.0.0
: Disabled
: Disabled
IP Address
10.12.12.123
140.112.1.23
288