D-Link xStackTM DGS-3300 User Manual page 165

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config authen_enable
Restrictions
Example usage:
To configure the user defined method list "Trinity" with authentication methods TACACS, XTACACS and local, in
that order.
DGS-3324SRi:4#config authen_enable method_list_name Trinity method
tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs
xtacacs local
Success.
DGS-3324SRi:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DGS-3324SRi:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DGS-3324SRi:4#
method_list_name – Enter a previously implemented method list name
defined by the user (create authen_enable). The user may add one,
or a combination of up to four (4) of the following authentication
methods to this method list:
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from a remote
TACACS+ server.
radius – Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a remote
RADIUS server previously implemented on the Switch.
server_group <string 15> – Adding this parameter will
require the user to be authenticated using a user-defined
server group previously configured on the Switch.
local_enable – Adding this parameter will require the user to
be authenticated using the local user account database on
the Switch. The local enable password of the device can be
configured using the "config admin local_password"
command.
none – Adding this parameter will require no authentication to
access the administration level privileges on the Switch.
Only administrator-level users can issue this command.
162