D-Link xStackTM DGS-3300 User Manual page 25

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
enable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable HTTP and configure port number:
disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-3324SRi:4#disable telnet
Command: disable telnet
Success.
DGS-3324SRi:4#
Used to enable the HTTP-based management software on the
Switch.
enable web <tcp_port_number 1-65535>
This command is used to enable the Web-based management
software on the Switch. The user can specify the TCP port
number the Switch will use to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The "well-known" port for
the Web-based management software is 80.
Only administrator-level users can issue this command.
DGS-3324SRi:4#enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DGS-3324SRi:4#
Used to disable the HTTP-based management software on the
Switch.
disable web
This command disables the Web-based management software
on the Switch.
None.
Only administrator-level users can issue this command.
22