D-Link xStackTM DGS-3300 User Manual page 45

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
Example usage:
To create an SNMP group named "sg1:"
DGS-3324SRi:4#create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DGS-3324SRi:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group to be deleted.
Only administrator-level users can issue this command.
DGS-3324SRi:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3324SRi:4#
Used to display the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of
each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
42