Sid Code; Sep Code - Lanier LD225 Fax Manual

Other Transmission Features
G
To enter a password, press [Pass-
word (SID)].
H
Enter the password with the number
keys, and then press [OK].
I
Press [Exit].
J
Press the {Start} key.
Note
❒ If you use Immediate Transmis-
sion and the fax machine at the
destination does not support
the SUB Code function, a mes-
4
sage will appear on the display
to inform you of this. When this
happens, press [OK] to cancel
the transmission.

SID Code

There are times when you may want
to use an "SID" (Sender ID) when
sending confidential faxes with the
SUB Code function. When you use a
Personal Box that has a password, en-
ter the SID Code as the password.
Note
❒ The ID can be up to 20 digits long.
❒ You can enter numbers, *, #, and
spaces to program an ID.
❒ You can store IDs in the destination
list and Programs. See p.129 "Regis-
tering and Changing Keystroke
Programs". See "Fax Destination",
General Settings Guide.
❒ The SID Code is printed on all re-
ports. This is possible only if the
SID Code is specified in [Adv. Fea-
tures] using the number keys.
50

SEP Code

Normally you can only use Polling
Reception to receive faxes from ma-
chines that have the Polling Reception
function and the same manufacturer.
However, if a machine of another
manufacturer supports Polling Re-
ception, you can receive fax docu-
ments from the other party using this
method instead.
You can receive documents that have
the same SEP Code as the SEP Code
you entered.
For details about the SEP Code, see
p.181 "Box Settings".
Limitation
❒ A SEP Code cannot be used with
Internet Fax.
Note
❒ The ID can be up to 20 digits long.
❒ Make sure the number of digits in
the ID matches the one set on the
machine from which you are receiving.
❒ You can enter numbers, *, #, and spac-
es to program an ID.
❒ You can store IDs in the destination
list and Programs. See "Fax Desti-
nation", General Settings Guide. See
p.129 "Registering and Changing
Keystroke Programs".
❒ The SEP Code is printed on all re-
ports. This is possible only if the
SEP Code is specified in [Adv. Fea-
tures] using the number keys.