Configuring Radius Server Settings; Configuring General Radius Server Settings - NETGEAR ProSafe WG102-500 Reference Manual

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Table 3-6.
Field Descriptions
Re-key if any Select the Re-key if any station disassociates checkbox to require rekeying after any
station wireless station logs off from the wireless access point.
disassociates

Configuring RADIUS Server Settings

For authentication, accounting, or both authentication and accounting using RADIUS, you
must configure primary servers and optional secondary servers. The general RADIUS server
settings can apply to all devices that are connected to the wireless access point. For each
individual SSID, you can also configure alternate RADIUS server settings that override the
general RADIUS server settings and that apply only to the devices that are connected to the
SSID.

Configuring General RADIUS Server Settings

To view or change the general RADIUS server settings:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > System > Radius Server. The Radius Server screen displays (see
Figure 3-9 on page 46).
| 45