Backing Up The Configuration; Restoring The Configuration - NETGEAR ProSafe WG102-500 Reference Manual

Figure 4-1
The following sections explain how to back up the configuration file, restore the configuration
file, revert the configuration file to factory default settings, and perform other tasks from the
Configuration screen.

Backing up the Configuration

To back up the configuration file:
1. On the Configuration screen (see
click Proceed.
2. Your browser extracts the configuration file from the wireless access point and prompts you
for a location on your computer to store the file. You can give the file a meaningful name at
this time, such as WGAP150.cfg.

Restoring the Configuration

To restore your settings from a saved configuration file:
1. On the Configuration screen (see
enter the full path to the file in the Configuration File field, or click Browse to locate the
file.
2. Next to Upload Configuration, click Proceed. If your browser requires a confirmation to
proceed, confirm the action.
62 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 4-1), next to Download Active Configuration,
Figure 4-1 on page 62), under Upload Configuration,