Viewing The L2Tp Tunnel Information Screen - NETGEAR ProSafe WG102-500 Reference Manual

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point

Viewing the L2TP Tunnel Information Screen

Figure 4-9
Table 4-2.
Field
System Information
You can configure these settings in
Status
Server Address
Username
Password
Tunnel IP Address
Tunnel Netmask
Management VLAN
Description
"Configuring L2TP Tunnel Management" on page
The current status of the L2TP tunnel. The modes are:
• Disabled. The L2TP tunnel is torn down.
• Connecting. The L2TP tunnel is in the process of being set up.
•
Connected. The L2TP tunnel is up.
Address of the L2TP Server.
L2TP/PPP username.
L2TP/PPP password.
The IP address of the L2TP tunnel.
The subnet mask of the L2TP tunnel.
Name of Management VLAN.
82.
| 73