Configuring Basic Wireless Network Settings - NETGEAR ProSafe WG102-500 Reference Manual

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point

Configuring Basic Wireless Network Settings

To configure the basic wireless network settings:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > Wireless Networks. The Wireless Networks screen displays.
Figure 2-11
Table 2-6 on page 27
Table 2-6. Wireless Network Settings
Field
Wireless Network SSID
Default VLAN ID
Admin Status
explains the fields of the Wireless Network Settings table.
Description
The wireless network name (SSID) for the wireless security profile.
The default VLAN ID that is associated with the wireless security profile.
The status of the wireless security profile (Enabled or Disabled).
| 27