WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 3-10
3.
Next to 802.1X Version, select one of the following radio buttons:
•
v1. Both EAPOL v1 and v2 devices can associate with the wireless access point.
•
v2. Only EAPOL v2 devices can associate with the wireless access point. This is the
default setting.
4.
Click Save or Save to Flash & Activate to save your settings.
WAPI Certificates
You can Install WAPI certificates to be used for authentication. You will need the following
information:
•
Authentication Server IP - Server IP for WAPI authentication
•
ASU Certification - Certificate for ASU
•
User Certification - Certificate for the User Account
To install WAPI Certificates:
1.
Select Configuration > System > WAPI Certificate. The WAPI Certificate screen
displays.
2.
Enter the Server address and Certificates to be uploaded.
3.
Click Install.
| 49