NETGEAR ProSafe WG102-500 Reference Manual page 53

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
• Server. The wireless access point allocates and provides IP addresses locally. When
you select this option, the screen expands as shown in
Specify the fields as explained in
for this screen.
Figure 3-14
.
Table 3-8. Alternate DHCP Server Settings
Field
IP Start Range
IP Stop Range
Subnet Mask
Broadcast
Address
Gateway
DNS 1
DNS 2
DNS 3
Domain
Lease Time
5. Click Save or Save to Flash & Activate to save your settings.
Description
The first address in the range of IP addresses to be assigned to DHCP clients.
The last address in the range of IP addresses to be assigned to DHCP clients.
The subnet mask to be used by DHCP clients.
The broadcast IP address to be used by DHCP clients.
The IP address of the default routing gateway to be used by DHCP clients.
The IP address of the primary static Domain Name Server (DNS) server
available to DHCP clients.
The IP address of the secondary static DNS server available to DHCP
clients.This server is used when the primary DNS server is not available.
The IP address of the tertiary static DNS server available to DHCP clients. This
server is used when the primary and secondary DNS servers are not available.
The domain name to be used by DHCP clients.
The period that the DHCP server grants to the DHCP clients to use the assigned
IP addresses.
Figure 3-14 on page
Table 3-8 on page 53. There are no default values
53.
| 53