NETGEAR ProSafe WG102-500 Reference Manual page 72

Table 4-1.
Field
Domain Name
Network IP Settings
You can configure these settings in
Network IP Mode
Network IP Address
Network Subnet Mask
Network Gateway
Network DNS
Time
System Time
Timezone
Up Time
Real Time Status
Status
72 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Description
The optional name of the domain.
"Configuring IP Settings" on page
The IP setting that specifies how the wireless access point acquires its
IP address (DHCP, static IP, or PPPoE).
The IP address of the wireless access point.
The subnet mask of the wireless access point.
The default gateway for the wireless access point's communication.
The DNS server for the wireless access point.
System time as available on the wireless access point.
The time zone in which the wireless access point operates. To set the
time zone, see "Configuring Basic System Settings" on page
The period that the wireless access point has been operating since it
was turned on.
The current status of the wireless access point. The modes are:
•
Running. The wireless access point is in operation.
•
Activating. The configuration is being saved and activated.
•
Starting up. The wireless access point is booting.
•
Rebooting. The wireless access point is rebooting via software.
20.
19.