Viewing Neighbor Aps Information - NETGEAR ProSafe WG102-500 Reference Manual

Table 4-5.
Field
Wireless Client
Manufacturer
MAC Address
WLAN SSID
VID
Type
Authentication
Status
Detail button
Note: A wireless network can include multiple wireless access points, all
using the same network name (SSID). This extends the reach of the
wireless network. Users can roam from one wireless access point to
another, providing seamless network connectivity. If this is the case,
only the stations associated with this wireless access point are
shown on the wireless clients information screen.

Viewing Neighbor APs Information

To view the neighbor APs information screen:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Monitor > Neighbor APs. The Neighbor APs screen displays (see
page 77). Table 4-6 on page 77
76 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Description
The manufacturer of the wireless client. This information is based on
the prefix of the wireless client's MAC address.
The wireless client's MAC address.
The wireless network to which the wireless client is attached.
The VLAN ID that is used on the wireless network to which the wireless
client is attached.
The radio policy of the wireless client (802.11b, 802.11g, or 892.11n).
The authentication method between the wireless client and the wireless
network to which the wireless client is attached.
The status of the wireless client attachment and the period that the
wireless client has been attached.
Click Detail to display details about each wireless client that is attached
to the wireless access point.
explains the fields.
Figure 4-13 on