NETGEAR ProSafe WG102-500 Reference Manual page 77

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 4-13
Table 4-6. Neighbor APs Information Fields
Field
Neighbor APs Discovery Settings
You can configure these settings in
Neighbor AP Discovery
Scanning Interval
Scanning Time
Neighbor AP List
Manufacturer
SSID
Ch
RSSI
BSSID
Security
Last Seen
Status
To sort the Neighbor APs table, use the Group by pull-down menu above the table or
click on a column heading.
Description
"Configuring Neighbor AP Discovery" on page
The status (enabled or disabled) of the Neighbor AP Discovery feature.
The frequency in seconds that the wireless access point scans the
channels to discover neighboring APs.
The time in milliseconds that the wireless access point scans a channel to
discover neighboring APs.
The manufacturer of the neighboring AP. This information is based on the
prefix of the wireless client's MAC address.
The wireless network name (SSID) of the neighboring AP.
The active RF channel of the neighboring AP.
The received signal strength indication (RSSI) of the neighboring AP.
The MAC address of the neighboring AP.
The type of wireless security of the neighboring AP.
The time stamp of the last scan.
The state of the neighboring AP.
101.
| 77