Backing Up, Restoring, And Erasing Your Settings - NETGEAR ProSafe WG102-500 Reference Manual

4.
Managing Your Network
This chapter describes how to use the management features of your wireless access point.
This chapter includes:
•

Backing Up, Restoring, and Erasing Your Settings

• "Upgrading the Wireless Access Point Firmware" on page 65
• "Changing the Administrator Password and User Name" on page 66
• "Viewing Network Management Information" on page 68
• "Configuring Remote Management" on page 78
• "Scheduling Management Tasks" on page 91
Backing Up, Restoring, and Erasing Your Settings
The configuration settings of the wireless access point are stored in a configuration file in the
wireless access point. From the Configuration screen, this file can be backed up to a
computer, restored from a computer, or reverted to factory default settings.
To access the Configuration screen:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Maintenance > Config. The Configuration screen displays (see
62).
" on this page
Figure 4-1 on page
4
| 61