Viewing The Basic System Information Screen - NETGEAR ProSafe WG102-500 Reference Manual

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point

Viewing the Basic System Information Screen

Figure 4-8
Table 4-1.
Field
System Information
You can configure some of these settings in
AP Name
Location
Software Version
Serial Number
MAC Address
Description
"Configuring Basic System Settings" on page 19
The name of the wireless access point.
The name of the location of the wireless access point.
The version of the firmware currently installed.
The serial number of the wireless access point.
The MAC Address of the wireless access point's Ethernet port.
| 71