NETGEAR ProSafe WG102-500 Reference Manual page 42

When you select WPA-TKIP from the Security Policy pull-down menu, the section expands to
display the WPA-TKIP fields.
example.
Figure 3-6
Specify the fields that are explained in
Table 3-4.
Field Descriptions
User Pre-Shared Key From the User Authentication pull-down menu, select the Pre-Shared
Authentication
RADIUS
Re-Keying The period during which the broadcast key remains valid. When the period expires, the
Period broadcast key is no longer valid and must be renewed. The default is 3600 seconds
(1 hour).
Re-key on Select the Re-key on re-keying period checkbox to require rekeying after the rekeying
re-keying period period has expired.
Re-key if any Select the Re-key if any station disassociates checkbox to require rekeying after any
station wireless station logs off from the wireless access point.
disassociates
42 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 3-6 shows Pre-Shared Key user authentication as an
Table 3-4.
Key to enable WPA-PSK. WPA-PSK does not require a RADIUS server
for authentication, but you must specify a passphrase.
Passphrase Enter a passphrase with a length must between 8 and 63
characters (inclusive).
Click the Hide / Show Passphrase hyperlink to switch
between hiding and showing the passphrase on screen.
Hiding the passphrase provides added security in a
public environment.
From the User Authentication pull-down menu, select RADIUS to
enable WPA, which requires a RADIUS server for authentication (see
"Configuring RADIUS Server Settings" on page
user authentication setting.
45). This is the default