NETGEAR ProSafe WG102-500 Reference Manual page 92

2. Select Configuration > Advanced > Schedule. The Schedule Tasks screen displays.
Figure 4-25
3. Schedule one or both tasks for the wireless access point as explained in
Table 4-12. Schedule Tasks Settings
Task
Reboot
Auto Channel Selection
4. Click Save or Save to Flash & Activate to save your settings.
92 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Field Description
Checkbox Select the checkbox next to Reboot to enable a
previously scheduled reboot task or to configure a
reboot task.
Note: To enable and/or configure all tasks, select
the checkbox next to Tasks in the table heading.
Schedule Select Monthly, Weekly, or Daily.
Day If monthly, select the day of the month; if weekly,
select the day of the week.
Time Select the hour and minutes.
Checkbox Select the checkbox next to Auto Channel Selection
to enable a previously scheduled channel selection
task or to configure a channel selection task.
Note: To enable and/or configure all tasks, select
the checkbox next to Tasks in the table heading.
Schedule Select Monthly, Weekly, or Daily.
Day If monthly, select the day of the month; if weekly,
select the day of the week.
Time Select the hour and minutes.
Table 4-12.