Configuring Wireless Traffic Filtering - NETGEAR ProSafe WG102-500 Reference Manual
802.11g wireless access point
Hide thumbs
Also See for ProSafe WG102-500:
- Installation manual (2 pages) ,
- Reference manual (52 pages)
Table of Contents
Advertisement
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Configuring Wireless Traffic Filtering
You can filter incoming wireless traffic based on MAC addresses, IP addresses, and
protocols. Traffic can be either accepted or dropped.
To configure filters for incoming wireless traffic for an individual SSID:
1.
Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2.
Select Configuration > Wireless Networks. The Wireless Networks screen opens,
displaying 16 wireless security profiles (see
3.
To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. Scroll down to the Filter Settings section.
4.
Select the Wireless Network Filter Enabled checkbox. The screen expands to display the
filter fields and policy table.
Figure 3-16
Figure 3-2 on page
38).
| 55
Advertisement
Table of Contents
Troubleshooting
