NETGEAR ProSafe WG102-500 Reference Manual page 51

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
2. Select Configuration > Wireless Networks. The Wireless Networks screen opens,
displaying 16 wireless security profiles (see
3. To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. Scroll down to the Access Control Settings section.
4. From the Access Control pull-down menu, select one of the following options:
• None. Access control is disabled. This is the default setting.
• Deny all except listed. Access control is denied to all wireless clients of the SSID
except for the trusted wireless clients whose MAC addresses are listed in the Listed
MAC Addresses table. When you select this option, the screen expands to display the
MAC Insertion Tool and the Listed MAC Addresses table, as shown in
page 51.
• Accept all except listed. Access control is granted to all wireless clients of the SSID
except for the wireless clients whose MAC addresses are listed in the Listed MAC
Addresses table. When you select this option, the screen expands to display the MAC
Insertion Tool and the Listed MAC Addresses table.
There is one Listed MAC Addresses table to deny access and another one to grant
access. Your selection from the Access Control pull-down menu determines which table
is displayed (see
Figure 3-12
There are two methods to add MAC addresses to the Listed MAC Addresses table:
• Manually enter one or more MAC addresses in the User defined MACs window of the
MAC Insertion Tool, then click <<< Add to list.
• Select one or more MAC addresses from the Connected clients window of the MAC
Insertion Tool, then click <<< Add to list.
Figure 3-12 on page 51).
Figure 3-2 on page 38).
Figure 3-12 on
| 51