Configuring Neighbor Ap Discovery - NETGEAR ProSafe WG102-500 Reference Manual

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point

Configuring Neighbor AP Discovery

The Neighbor AP Discovery feature lets the wireless access point automatically register
other wireless devices in its area and includes these devices in the Neighbor APs List (see
"Viewing Neighbor APs Information" on page
To configure the Neighbor AP Discovery feature:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > Advanced > Neighbor AP. The Neighbor AP screen display (see
Figure 5-4 on page 101).
Figure 5-4
3. Specify the neighbor AP settings as explained in
Table 5-3. Neighbor AP Settings
Field
Neighbor AP Discovery
Scanning Interval
Scanning Time
4. Click Save or Save to Flash & Activate to save your settings.
76).
Description
By default, the wireless access point automatically discovers other wireless
devices in its area. Deselect the Enable checkbox to disable the Neighbor
AP Discovery feature.
The frequency in seconds that the wireless access point scans the
channels to discover neighboring APs. The default setting is 10 seconds.
The time in milliseconds that the wireless access point scans a channel to
discover neighboring APs. The default setting is 50 milliseconds.
Table 5-3.
| 101