NETGEAR ProSafe WG102-500 Reference Manual page 30

Table 2-7. Wireless Network Settings (continued)
Field
Multicast Filter
Multicast Rate
Data Rate
5. Click Save or Save to Flash & Activate to save your settings.
Note: Other wireless settings on the Edit Wireless Network screen are
discussed in
30 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Description
Select the Multicast Filter checkbox to enable filtering of egress multicast
packets that are sent from the wireless access point.
Select the data rate for egress multicast packets from the pull-down menu.
The smallest data rate that you can select is 1 Mbps; the largest is
54 Mbps. The default rate is 1 Mbps.
Select one of the following options:
•
Fixed. All data packets are transmitted according to the transmit rate
that you select from the pull-down menu. The smallest data rate that you
can select is 1 Mbps; the largest is 54 Mbps. The default rate is 1 Mbps.
•
Auto. All data packets are transmitted according to the automatically
selected best transmit rate.
Chapter 3, "Wireless Configuration and Security."