Disabling Web Management Access From Wireless Clients - NETGEAR ProSafe WG102-500 Reference Manual

Table 4-7. Web Access Settings (continued)
Field
Management IP
Web Access Control
WARNING!
If you specify clients in the Management IP table but do not
include the computer that you are accessing the Web
management interface from, you will lose your Web management
access when you click Save to Flash and Activate. You must then
access the Web management interface from one of the clients that
are specified in the Management IP table.
4. Click Save or Save to Flash & Activate to save your settings.

Disabling Web Management Access from Wireless Clients

As an added security measure, you can disable Web management access from wireless
clients. You can still access Web management over a wired connection.
To disable Web management access from wireless clients.
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > System > Security. The Security screen displays (see
on page 81).
80 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Description
Web access control is disabled by default. Select the Enable checkbox
to specify clients that are allowed Web management access. The
screen expands to display the fields that let you add clients to the
Management IP table. After you have completed these fields, click the
Add button to add the client to the table. Only clients in the Management
IP table are allowed Web management access.
To delete a client from the table, click the Del button to the right of the
client.
IP Address The IP address of the client that is allowed Web
management access.
Subnet Mask The subnet mask of the client that is allowed Web
management access.
Figure 4-15