Configuring Tr069 Operation - NETGEAR ProSafe WG102-500 Reference Manual

4. If you selected to add or edit an SNMP user, complete the SNMP user fields and select a
Status checkbox as explained in
Table 4-11. SNMP User Settings
Field
SNMPv3 User Name
Authentication Protocol
Authentication Password
Privacy Protocol
Privacy Password
Status
5. Click Save or Save to Flash & Activate to save your settings.

Configuring TR069 Operation

TR-069 feature provides secure communication between the CPE and an Auto-Configuration
Server (ACS). The CPE WAN Management Protocol defines the mechanism to control CPE
configuration, CPE firmware and other management functions into a common framework.
The following settings and options are available: Enabled, ACS Server URL, ACS Username,
ACS Password, Periodic Inform Interval
Enable/Disable - TR069 client
ACS Server URL - Defines ACS server specific URL
ACS Username - Defines ACS Username for TR069 login
90 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Table 4-11.
Description
The name of the SNMPv3 user that is allowed to access the SNMP
agent that collects the MIB objects from the wireless access point.
The protocol for authenticating the SNMPv3 user. This pull-down menu
lets you select one of the following authentication protocols:
• HMAC-MD5. Hashing for Message Authentication (HMAC) algorithm
in combination with Message Digest 5 (MD5).
•
HMAC-SHA. HMAC in combination with Secure Hash Algorithm
(SHA).
The password that an SNMPv3 user must enter to be granted access to
the SNMP agent that collects the MIB objects from the wireless access
point.
The encryption method for the communication between the SNMPv3
user and the SNMP agent that collects the MIB objects from the wireless
access point. This pull-down menu lets you select one of the following
options:
•
None. No encryption method.
•
CBC-DES. Cipher Block Chaining (CBC) mode to the Data
Encryption Standard (DES) algorithm.
The password that an SNMPv3 user must enter to allow decryption of
the MIB objects that the SNMP agent collects from the wireless access
point. This field is applicable only when you select CBC-DES as the
privacy protocol.
Select the Enable checkbox to allow the SNMPv3 user to access the
SNMP agent that collects the MIB objects of the wireless access point. If
you want to configure but not enable the SNMPv3 user, select the
Disable checkbox.