WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 5-2
5.
Enter the hotspot settings as explained in
Table 5-1. Hotspot (or Captive Portal) Settings
Field
Redirect URL
Authentication URL
Access Timeout
Inactive Timeout
Description
Select one of the following options from the pull-down menu:
•
HTTP. The URL to which the user must be redirected starts with HTTP.
•
HTTPS. The URL to which the user must be redirected starts with
HTTPS.
To the right of the pull-down menu, enter the URL to which the user must be
redirected.
Select one of the following options from the pull-down menu:
•
HTTP. The URL for user authentication starts with HTTP.
•
HTTPS. The URL for user authentication starts with HTTPS.
To the right of the pull-down menu, enter the URL for user authentication.
The time in seconds after which the user is redirected to the Redirect URL.
The default is zero, which means that redirection is disabled and the user is
not automatically redirected to the Redirect URL.
The time in seconds after which the user must be re-authenticated. The
default is 300 seconds (5 minutes).
Table
5-1.
| 97