Web Interface Menu; Configuring Basic System Settings, Ip Settings, And Lan Settings - NETGEAR ProSafe WG102-500 Reference Manual

Web Interface Menu

The navigation tabs across the top of the Web interface menu provide access to all the
configuration functions of the wireless access point, and remain constant. The menu items in
the blue bar change according to the navigation tab that is selected.
Figure 2-4
The bottom right corner of the Basic Settings screen and any other screen that allows you to
make configuration changes shows the Save and Save to Flash & Activate buttons.
Figure 2-5
These buttons have the following functions:
• Save. Saves any configuration changes but does not activate the new configuration, and
the changes are lost when you reload the wireless access point.
• Save to Flash & Activate. Activates any configuration changes and saves them to the
flash memory, allowing the changes to remain active after the wireless access point has
been reloaded.
Configuring Basic System Settings, IP Settings, and LAN
Settings
The Basic Settings screen consists of three sections: Basic System Settings, IP Settings, and
LAN Settings. Depending on the selections that you make, the IP Settings section and the
LAN Settings section shows different fields for you to configure.
To open the Basic Settings screen, log in to the wireless access point as described in
"Logging in to the Wireless Access Point" on page
18 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
17. The Web browser displays the Basic