Configuring L2Tp Tunnel Management - NETGEAR ProSafe WG102-500 Reference Manual

To disable Web management:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > WEB Administration > Web Administration. The Web
Administration screen displays.
Figure 4-16
3. Next to Web Admin Interface, the Enable radio button is selected by default. To disable Web
management, select the Disable radio button.
4. Click Save or Save to Flash & Activate to save your settings

Configuring L2TP Tunnel Management

An L2TP tunnel from the wireless access point to a server allows for centralized traffic
management.
To configure L2TP tunnel management:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > System > L2TP Tunnel.
3. Select the L2TP Tunnel Enabled checkbox. The screen expands to let you configure the
L2TP tunnel settings (see
82 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 4-17 on page 83).