Configuring The Radius Server Settings - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual
Dual band wireless access point (802.11a/g)
Hide thumbs
Also See for WAG302 - ProSafe Dual Band Wireless Access Point:
- Reference manual (104 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
Configuring the RADIUS Server Settings
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
"Configuring WPA with RADIUS" on page
page
2-31, or
"Configuring WPA and WPA2 with RADIUS" on page 2-32
implementing these security options).
Note: The RADIUS Server Settings apply to all profiles. They only need to be configured
once per wireless access point.
To set up or modify the RADIUS Server Settings:
1. From your Web browser, log in to the WAG302 using the default LAN address of
http://192.168.0.230, user name admin and password password, or use the LAN address and
password that you set up.
2. Under Security in the main menu, select RADIUS Server Settings. The radius Server Settings
screen will display.
3. Enter the following RADIUS Server settings:
•
Authentication/Access Control RADIUS Server Login. This configuration is required
for authentication and access control using a RADIUS Server.The IP Address, Port
Number and Shared Secret are required for communication with the RADIUS Server. You
can configure a Secondary RADIUS Server to use if the Primary RADIUS Server fails.
–
IP Address. The IP address of the RADIUS Server. The default is 0.0.0.0.
–
Port Number. The port number of the RADIUS Server. The default is 1812.
–
Shared Secret. This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant (wireless client).
•
Reauthentication Time: The time interval in seconds after which the supplicant will be
authenticated again with the RADIUS Server. The default is 3600 seconds.
•
Global-key Update: Check this option to update the Global Key. The Global Key can be
updated based on time interval in seconds or number of packets exchanged using the
global key. The default is 3600 seconds. You can also check the
2-24
2-30,
"Configuring WPA2 with RADIUS" on
Basic Installation and Configuration
v2.0, May 2006
for specifics on
Advertisement
Table of Contents
