NETGEAR ProSafe WG102-500 Reference Manual page 47

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Table 3-7. RADIUS Server Settings (continued)
Field
Secondary
Authentication Server
Secret
Authentication Port
Primary Accounting
Server
Secret
Authentication Port
Secondary Accounting
Server
Secret
Authentication Port
Reauthentication Time
Maximum
Retransmission
Radius Request Interval
4. Click Save or Save to Flash & Activate to save your settings.
Descriptions
The IP address of the secondary RADIUS server for authentication. The
default address is 0.0.0.0. The secondary RADIUS server is used when the
primary RADIUS server is not available.
The shared key between the wireless access point and the secondary
RADIUS server during authentication.
The UDP port number on the wireless access point that is used to access
the secondary RADIUS server for authentication. Click Default AuthPort to
revert to the default port, which is number 1812.
The IP address of the primary RADIUS server for accounting. The default
address is 0.0.0.0.
The shared key between the wireless access point and the primary RADIUS
server during the accounting process.
The UDP port number on the wireless access point that is used to access
the primary RADIUS server for accounting. Click Default AuthPort to revert
to the default port, which is number 1813.
The IP address of the secondary RADIUS server for accounting. The default
address is 0.0.0.0. The secondary RADIUS server is used when the primary
RADIUS server is not available.
The shared key between the wireless access point and the secondary
RADIUS server during the accounting process.
The UDP port number on the wireless access point that is used to access
the secondary RADIUS server for accounting. Click Default AuthPort to
revert to the default port, which is number 1813.
The time in seconds that the RADIUS request attempts should continue
after the first authentication attempt. Enter 0 to disable reauthentication,
which is the default setting.
The maximum number of RADIUS request attempts after the first
authentication attempt. The default is 3 attempts.
The interval in seconds between each RADIUS request attempt. The
specified time interval is doubled for every retransmission. The default is
3 seconds.
| 47