10
Specifying settings for the image in the results report (Mode 023)
Specify whether or not an image of the transmitted document is added to the
results report.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2, 1, 0
10-84
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description
Setting
-----------------------
1111
Specifies whether or
0
not an image of the
1
transmitted docu-
ment is added to the
results report.
-----------------------
000
Description
*Do not change these bits
when specifying settings
for this function.
Is not added
Is added
*Do not change these bits
when specifying settings
for this function.
362/350/282/250/222
Utility mode
Page Refer-
ence
----------
p. 6-11
----------