11
Reminder
After changing the settings for parameters marked with an asterisk (*),
turn the machine off, then on again.
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
To specify the TCP/IP settings
1
In the Administrator mode, click the [Network] tab.
–
For the procedure to log on to Administrator mode, refer to "Log-
ging on to Administrator mode" on page 11-9.
2
Click [Common Setting], then [TCP/IP].
11-48
Specifying settings using PageScope Web Connection
362/350/282/250/222