11
11.8
Transmission source registration
Select the information, such as the name, fax number, or address, that is
printed at the edge of the page when a fax is sent.
Registers this transmission source name. Since multiple transmission sourc-
es can be registered, the names for each destination and track can used sep-
arately. The registered transmission source name can be changed in the
same procedure as that of registration.
To register transmission sources
1
In the Administrator mode, click the [Fax/Scan] tab.
–
For the procedure to log on to Administrator mode, refer to "Log-
ging on to Administrator mode" on page 11-9.
2
Click [TSI Registration].
3
Enter the transmission source name, and then click [Apply].
–
Up to 8 transmission source names can be registered.
–
Up to 40 characters can be entered.
4
Click [OK].
11-30
Specifying settings using PageScope Web Connection
362/350/282/250/222