Registering/specifying settings
Changing/deleting a program
1
Perform steps 1 through 4 of the procedure for registering a transmis-
sion program, until the screen for selecting a one-touch dial button ap-
pears.
–
For details, refer to "Registering a transmission program" on
page 9-19.
2
Touch the one-touch dial
button whose settings
are to be changed.
A confirmation screen
appears, showing the
specified settings.
3
Touch the button for the
setting to be changed,
and then change the set-
ting.
–
To delete the one-
touch dial button,
touch [Delete].
Why were all the pro-
?
grammed settings
cleared?
% If a different program
type is selected, all programmed settings are cleared.
4
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
362/350/282/250/222
9
9-27