Specifying settings using PageScope Web Connection
11.9
TX Settings (Administrator mode)
Transmission settings
The default settings for transmission can be specified.
The following settings can be specified.
Item
Quality/Mode
Default Quality
Default Density
Com. Mode
FAX Menu
TX
TSI
TSI Selection
Rotation TX
2-Sided TX
Original
Bind
Direction
362/350/282/250/222
Description
Specify the quality default value that is reset after operation is complete.
Specify the density default value that is reset after operation is complete.
Specify the communication mode default value that is reset after operation is
complete.
Select the transmission method.
Memory TX: Sends the data after the entire document is scanned.
Quick Scan TX: Sends the document one page at a time.
Select the transmission source name.
Off: Does not attach the transmission source name.
Inside Body Text: Prints the transmission source name on the original
document.
Outside Body Text: Does not print the transmission source name on the
original document.
Select the name of the transmission source.
Specify whether to reset the rotation transmission after the operation is
complete.
Specify whether to reset the duplex transmission after the operation is
complete.
Select the position of the document binding margin for double - sided trans-
missions.
11
11-31