Programming A Name (Tsi Registration); To Register A Transmission Source Name - Konica Minolta bizhub 362 User Manual

Utility mode
10.9

Programming a name (TSI Registration)

Text entered as the transmission source can be printed at the edge of faxes.
Register the name of transmission source.
- A maximum of eight transmission source names can be registered. Since
multiple transmission source names can be registered, a different trans-
mission source name can be used for different recipients or for different
accounts.
- A maximum of 40 characters can be entered for the transmission source
name.
Note
For details on sending faxes with different transmission source names,
refer to "Sending faxes printed with transmission information" on
page 6-7.

To register a transmission source name

1
After entering Administrator mode, touch [Admin. 1].
2
Touch [Initial Setting].
3
Touch [TSI Registration].
362/350/282/250/222
10
10-27