Specifying Printing Of The Memory Clear Report And The Report For A Broadcast Transmission (Mode 002) - Konica Minolta bizhub 362 User Manual

Utility mode
Specifying printing of the memory clear report and the report for a
broadcast transmission (mode 002)
Specify whether the memory clear report is printed and when the report is
printed with a broadcast transmission.
Note
The memory clear report is printed when the data stored in the memory
is erased, for example, after a power outage.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2
1, 0
362/350/282/250/222
7 6 5 4 3 2 1 0
1 0 1 0 1 0 0 0 (HEX: A8)
Description Setting
----------------------- 1010
Specifies whether or 0
not the memory
1
clear report is print-
ed.
Specifies whether 0
the results of a
broadcast transmis-
1
sion is printed alto-
gether in a
transmission report
or individually.
----------------------- 00
Description
*Do not change these bits
when specifying settings
for this function.
Does not print
Prints
Prints all together in a
transmission report
Print individual transmis-
sion reports
*Do not change these bits
when specifying settings
for this function.
10
Page Refer-
ence
----------
----------
p. 12-3
----------
10-75