Konica Minolta bizhub 362 User Manual page 190

Registering/specifying settings
12
Touch either [ON] or
[OFF] to specify a setting
for "Remote Input
Check", and then touch
[Enter].
– If "ON" was selected,
type in an F-code
password.
What does the "Re-
?
mote Input Check"
function do?
% This function specifies whether or not registering a document on
this machine's bulletin board from another fax machine is regulated
with a password.
13
Touch [Remote Output Check].
14
Touch either [ON] or
[OFF] to specify a setting
for "Remote Output
Check", and then touch
[Enter].
– If "ON" was selected,
type in an F-code
password.
What does the "Re-
?
mote Output Check"
function do?
% This function specifies whether or not retrieving a bulletin board
document from another fax machine is regulated with a password.
15
Check the information to
be registered, and then
touch [Enter].
– To change a setting,
touch the button for
the setting to be
changed, and then
specify the new set-
ting.
16
Touch [Enter] in each
screen until the standby
screen (initial screen) appears.
362/350/282/250/222
9
9-31