Specifying The Setting For Tray Selection Of Received Faxes (Mode 037) - Konica Minolta bizhub 362 User Manual

Utility mode

Specifying the setting for tray selection of received faxes (mode 037)

Specify whether the trays and bypass tray can be selected when printing re-
ceived faxes.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5
4
3
2
1, 0
(*1) Available only when the optional paper feed cabinet is installed.
(*2) Bits 7, 6, 5, 4 and 2 cannot all be set to "0".
362/350/282/250/222
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description Setting
Specifies whether or 0
not the 1st tray can
1
be selected when
printing received
faxes.
Specifies whether or 0
not the 2nd tray can
1
be selected when
printing received
faxes.
Specifies whether or 0
not the 3rd tray can
1
be selected when
printing received
faxes. (*1)
Specifies whether or 0
not the 4th tray can
1
be selected when
printing received
faxes. (*1)
----------------------- 1
Specifies whether or 0
not the bypass tray
1
can be selected
when printing re-
ceived faxes.
----------------------- 00
Description
Cannot be selected (*2)
Can be selected
Cannot be selected (*2)
Can be selected
Cannot be selected (*2)
Can be selected
Cannot be selected (*2)
Can be selected
*Do not change this bit
when specifying settings
for this function.
Cannot be selected (*2)
Can be selected
*Do not change these bits
when specifying settings
for this function.
10
Page Refer-
ence
p. 3-6
p. 3-6
p. 3-6
p. 3-6
----------
p. 3-6
----------
10-87