Printing Received Faxes - Konica Minolta bizhub 362 User Manual

3
3.2 Reception
If the machine is set to automatically receive faxes (auto reception), no spe-
cial operation is needed in order to receive the fax.
When the telephone call is completed, press the [Start] key to receive the fax.
When the reception is finished, a beep is heard, the connection is cut, and
the received document is printed.

Printing received faxes

When printing the received fax, the page size of the received document is
compared with the size of the loaded paper, and the fax is printed on paper
of the same size as the received document, if it is loaded.
If paper of the same size is not loaded, the following operations are per-
formed.
- If the fax document is larger: The fax is reduced to fit in the paper or it is
printed on paper one size larger.
- If the orientation of the fax document and of the paper are different: It is
automatically rotated 90°, then printed. (rotate printing)
- If the fax document is longer: The fax is automatically reduced to fit within
the paper. If still cannot fit within a single sheet of paper, even after being
reduced as much as 65%, the fax is divided and printed on separate
sheets of paper.
Note
A3-size documents can only be received if the fax complies with the ITU-
T (formerly CCITT) recommendations that A3-size documents be re-
ceived at full size.
!
Detail
The reception method can be changed using the Administrator mode and
the software switch settings. For details, refer to "Specifying the proce-
dure for received documents (Document Management)" on page 10-55
and "Specifying software switch settings (machine functions)" on
page 10-69.
3-6
Reception
362/350/282/250/222