F-Codes; F-Code Confidential Transmissions - Konica Minolta bizhub 362 User Manual

6
6.13

F-codes

This machine is compatible with F-code transmissions. The following section
describes the various functions that use F-codes.
F-codes
F-code transmissions are fax transmission functions that use "SUB" (sub-
addresses), "SEP" (selective polling), and "PWD" (password), which are reg-
ulated by the G3 standards of the ITU-T (International Telecommunication
Union). Confidential box transmissions and bulletin board transmissions are
possible only with similar machines compatible with F-code transmission.
Using the [*], [#], and [0] through [9] keys of the keypad, specify the following,
as necessary.
- SUB: Specify when transmitting using F-codes.
- SEP: Specify when calling another fax machine to retrieve a document
from it (polling reception).
- SID/PWD: Specify when limiting the recipient/caller with a password.
!
Detail
If an F-code is specified by directly typing it in, only one transmission with
the specified F-code can be completed per call. However, when sending
the same fax to multiple recipients at the same time (broadcast transmis-
sion), different F-codes cannot be specified for each recipient.
If one-touch dial buttons are programmed with F-codes, the appropriate
F-code can quickly be transmitted to the recipient.

F-code confidential transmissions

By programming F-codes, different confidential boxes can be created on this
machine. Since a password is required in order to retrieve documents re-
ceived in the different confidential boxes, confidential faxes can safely be
sent and received.
!
Detail
In order to receive an F-code confidential document, the confidential
boxes must be registered in advance. For details, refer to "Registering
confidential boxes" on page 9-33.
6-26
Useful transmission functions
362/350/282/250/222