Specifying Settings For Fax Reception Functions (Mode 030) - Konica Minolta bizhub 362 User Manual

10

Specifying settings for fax reception functions (mode 030)

Specify whether or not rotation or 2in1 printing is used with received faxes.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6, 5
4
3, 2, 1, 0
(*) If rotation printing is specified, you can specify whether or not crosswise
sorting is performed if a remote copy fax is received.
10-86
7 6 5 4 3 2 1 0
1 0 1 1 0 0 0 0 (HEX: B0)
Description Setting
----------------------- 1
Specifies whether or 00
not rotation printing
01
is used with re-
ceived faxes. (*)
10
11
Specifies whether or 0
not 2in1 printing is
used with received
1
faxes. (*)
----------------------- 0000
Description
*Do not change this bit
when specifying settings
for this function.
Does not rotate
Rotates (Does not sort
crosswise if a remote
copy fax is received)
Rotates (Sorts crosswise
if a remote copy fax is re-
ceived)
*Do not specify this set-
ting for this function.
2in1 printing is not used
with received faxes
2in1 printing is used with
received faxes
*Do not change these bits
when specifying settings
for this function.
362/350/282/250/222
Utility mode
Page Refer-
ence
----------
p. 3-6
p. 3-6
----------