Setting Up A Bulletin Board; To Set Up A Bulletin Board - Konica Minolta bizhub 362 User Manual

9
9.5

Setting up a bulletin board

In order to register a document on a bulletin board, the bulletin board must
been set up in advance. The following procedure describes how to set up a
bulletin board.
!
Detail
Specify an F-code for each bulletin board. If a password is to be specified
for the bulletin board, also specify an F-code password. For details, refer
to "F-codes" on page 6-26.
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the standby screen (initial screen).

To set up a bulletin board

1
Press the [Utility/Counter] key.
2
Touch [User Setting].
3
Touch [FAX].
4
Touch [Bulletin].
9-28
Registering/specifying settings
362/350/282/250/222