Specifying The Settings; Specifying Whether Or Not A Received Date Report Is Added And Its Format (Mode 016); Factory Settings; Specifying Settings For The Image In The Results Report (Mode 023) - Konica Minolta bizhub C200 Network Administration Manual

3
3.5.5

Specifying whether or not a received date report is added and its format (mode 016)

Specify whether or not a received date report is added and how it is formatted when a network fax or fax is
received.

Factory settings

Factory settings
Bits
Settings

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7-6 -
5 Specify whether or not a received date report is added dur-
ing mail receptions.
4 Specify whether the received date report is added outside or
inside of the image during mail reception.
3-2 -
1 Specify whether or not a received date report is added dur-
ing fax receptions.
0 Specify whether the received date report is added outside or
inside of the image during fax reception.
3.5.6

Specifying settings for the image in the results report (mode 023)

Specify whether or not an image of the transmitted document is added to the results report.
Factory settings
Factory settings
Bits
Settings

Specfying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7-4 -
3 Specify whether or not an image of the transmitted docu-
ment is added to the results report.
2-0 -
3-20
Specifying machine functions (software switch settings)
7654 3210
0001 0001 (HEX: 11)
7654 3210
0011 1000 (HEX: 38)
Settings Details
00 *Do not change the settings
for these bits.
0 Is not added
1 Is added
0 Added outside the image
1 Added within the image
00 *Do not change the settings
for these bits.
0 Is not added
1 Is added
0 Added outside the image
1 Added within the image
Settings Details
0011 *Do not change the settings
for these bits.
0 Is not added
1 Is added
000 *Do not change the settings
for these bits.
bizhub C200