Changing/Deleting An Index - Konica Minolta bizhub 362 User Manual

Registering/specifying settings
5
Touch the index button
to be registered.
A screen appears, allow-
ing you to enter the
name that will appear on
the button.
6
Type in the name that
will appear on the index
button, and then touch
[Enter].
– A maximum of 8
characters can be
entered.
7
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
Note
If software switch settings were specified to limit use of the FAX Regis-
tration screen to the administrator, [FAX] does not appear in the User Set-
ting screen. In this case, destination can only be registered, edited and
deleted in Administrator mode. For details on the software switch set-
tings, refer to "Specifying software switch settings (machine functions)"
on page 10-69.

Changing/deleting an index

1
Perform steps 1 through 4 of the procedure for registering an index
button, until the screen for selecting an index button appears.
– For details, refer to "To register an index" on page 9-16.
362/350/282/250/222
9
9-17